1. Encode summary of all incoming parts and materials from supplier and Central Warehouse.
2. Encode summary of all material receiving report.
3. Encode summary of material issuance report.
4. Prepare complete attachment of material receiving report.
5. Forward accomplished transmittal slip to Head office and email the soft copy.
6. Prepare proper filing of warehouse documents.
7. Assist receiving, issuance and inventory of parts and materials.
8. Prepare and update inventory master file.
9. Perform other duties that maybe assigned by the superior from time to time.

1. Maintains the safety and security of the warehouse.
2. Secures the safety of the materials and/or equipment stored at the warehouse at all times.
3. Conducts regular inventory of the materials/supplies kept at the warehouse.
4. Performs other relevant tasks that may be assigned from time to time.
5. Monitor of receiving and issuance of materials at warehouse.
6. Check invoice and delivery receipt and notify equipment control officer.
7. Prepares purchase order needed materials and submit to Purchasing.
8. Maintain proper housekeeping inside and within the premises of the warehouse.

1. Monitors and record of all incoming and outgoing materials and/or equipment.
2. Maintains the safety and security of the warehouse.
3. Secures the safety of the materials and/or equipment stored at the warehouse at all times.
4. Conducts regular inventory of the materials/supplies kept at the warehouse.
5. Performs other relevant tasks that maybe assigned from time to time.
6. Check invoice & delivery receipt and notify to quality control officer.
7. Prepared Purchase Order of needed materials and submit to Purchasing
8. Check and monitor all materials and fixed asset transferred at site.
9. Monitoring of fast moving & consumable items. On time ordering of replenishment.
10. Monitor and record incoming and outgoing of diesel, oil and lubricant and daily consumption.
11. Prepare monthly inventory report, receiving and issuance report for materials and fixed asset.
12. Maintain proper housekeeping inside and within the premises of the warehouse.

1. Perform minor repair and troubleshooting of light vehicles, trucks, trailers, tower lights & other support equipment deemed necessary as support services to the Maintenance personnel in their daily routine job.
2. Assist the LV Supervisor in the inspection, check-up & servicing of light vehicles including parts replacement.
3. Perform other repair and maintenance of light vehicles parts and components such as:
4. Dismantling and installation of clutch disc, pressure plate assembly & bearings
5. Steering system check-up, alignment of suspension, steering pump, gear box and other sub-components of light vehicle & trucks.
6. Suspension repairs including leaf spring, bushing and torque rods.
7. Brake system check-up to include brake lining replacement, repair kits of valves and air brake master.
8. Removal and installation of new or repaired parts & components etc.
9. Check engine components, pumps etc.
10. Assist in the tear down and parts survey of breakdown light vehicles, trucks, tower lights etc.
11. Adhere to company safety and environment policy and procedures.
12. Assist in the proper housekeeping of LV bay area daily.
13. Identify the right tools for the right jobs.
14. Perform other related duties as assigned by the immediate superior from time to time.

1. Cut metals as per requirements, design and diagram.
2. Perform gas and electrical welding. Applicable on chamfering, building up welding, SMAW application on Heavy Equipment Repairs.
3. Fabricate brackets, stands and other support for equipment activities.
4. Conduct walk around check prior to operation.
5. Conduct routine inspection to determine parts or equipment scheduled for welding.
6. Conduct routine inspection of finished job.
7. Designs and fabricates parts and items needed for maintenance activities.
8. Accomplish daily work reports.
9. Identify type of metals to be welded.
10. Perform failure analysis on metals.
11. Perform radiator overhaul and repair.
12. Delegates assigned task to subordinates for accomplishing work orders the fastest time possible.
13. Perform other related duties as assigned.

1. Conduct pre-start check-up / assessment of the unit before start of the engine.
2. Conduct post check-up / assessment of the unit after the shift.
3. Follow instruction of the immediate superior or superior in the working or mining areas.
4. Operate the equipment with utmost safety, care and cost efficient manner.
5. Provide written report at the end of the shift.
6. Follow traffic and road signs.
7. Ensure that all incoming/outgoing employees are ferried to destination on time.
8. Perform related functions.

1. Perform check-up of the unit before and after shift.
2. Operate all equipment, quality checks, preventative maintenance and minor repairs.
3. Able to set up drill cassettes and remove dull bits.
4. Perform incoming inspection on new and re-sharpened drill bits.
5. Perform outgoing inspection on dull drill bits being sent out for re-sharpening.
6. Perform related functions.

1. Direct the vehicle and equipment maintenance, repair and acquisition activities.
2. Assign, supervise and evaluate the work of assigned staff; advise, assist and train subordinates as necessary; conducts performance appraisal of subordinates.
3. Administer the diagnosis of mechanical, electrical, computerized and hydraulic problems in vehicles and equipment in order to identify necessary repairs overhauls and modifications.
4. Supervise the preparation, daily, monthly and annual summary reports and maintain records of assigned operations.
5. Respond to the resolution of inquiries, complaints or requests for information regarding area of assignment.
6. Handle the more complex and/or sensitive issues.
7. Inspect and monitor work in progress and upon completion, equipment, tools and other areas of responsibility.
8. Coordinate with Safety Officer/Supervisor with regards to safety tool box meeting.
9. Perform other related duties as assigned.

1. Conduct minor trouble shooting and repair of basic electrical parts and light heavy equipment including batteries.
2. Dismount and mount electrical components.
3. Disassemble and reassemble selective electrical component as directed by IMMEDIATE SUPERIOR.
4. Assist in the electrical major repair and trouble shooting.
5. Implement preventive maintenance of electrical components.
6. Prepare and submit daily accomplishment report.
7. Prepare electrical part survey.

Qualifications, Skills and Experience:

1. At least high school graduate, preferable vocational graduate in Auto Electrician or Industrial Electrician.
2. At least 2 years in experience in Auto Electrician of heavy equipment.
3. Pass required trade test.
4. Must able to apply service parts manual.
5. Must be able to interpret Electrical/Electronic schematic diagram of heavy equipment.
6. Rewiring of electrical motor, alternators and other electrical accessories.
7. Rewiring/Re-harness complete light and heavy equipment.

1. Under the supervision of his immediate superior, prepare the required oil, lubricants, grease, filters etc. in terms of specification and quantity necessary in the execution of preventive maintenance servicing based on the equipment service meter reading (SMR).
2. Check and correct the Manufacturer’s recommended level and condition of oil, filter, greases etc. for each type and make of the equipment scheduled for PMS.
3. Ensure safety practices while performing the assigned tasks bearing in mind the effect of oil spillage and solid waste disposal to the environment.
4. Responsible for the replacement and installation of all required filters, draining and replacement, topping-off of required hydraulic oil, engine oil, transmission oil, gear oil etc.
5. Properly dispose and segregate contaminated solid waste and used oil in accordance with the company’s safety and environmental policy and procedure.
6. Conduct visual inspection of engine running and condition, gauges and instrumentation.
7. Take oil samples (SOS) as instructed by the Maintenance Planner and label them with the type of oil and source of sample.
8. Washing and degreasing of all equipment with completed PMS and submit checklist to the Maintenance Planner for recording.
9. Perform minor equipment repair as necessary during PMS such as bolt tightening, defective hose replacement, busted auto bulbs, welding etc. and other visual check up.
10. Contained oil spillage, immediately after completion of PMS and ensure proper housekeeping on designated area daily.

Qualifications, Skills and Experience:

1. High school or Vocational/Technical course graduate would be an advantage.
2. One (1) year of related work experience in heavy equipment or automotive servicing
3. Identify all type of fuel, oil and lubricants and its usage and applications.

Qualifications, Skills and Experience:

1. High school or vocational/welding technology graduate would be an advantage.
2. At least two (2) years of related welding experience in heavy welding and fabrication industry
3. Knowledgeable in various type of welding such as mig (GMAW), arc (GTAW), tig(SMAW) and gas welding desirable.
4. At least (B+) Trade certification from third party desirable.

1. Calculate dimensions & tolerances using knowledge of mathematics & basic measuring instruments.
2. Machine parts to specifications using machine tools such as line boring machine, lathe machine, shaper or grinders.
3. Measure, examine & test completed parts or components in order to detect defects & ensure conformance to specification using precision instrument.
4. Set-up, adjust & operate all of the basic machine tools & specialized variations of tools in order to perform precision machining operations.
5. Align & secure holding fixtures, cutting tools, attachment, accessories & materials into the machine.
6. Monitor the feed & speed of line boring machine during the machining process.
7. Study sample parts, components, drawing & engineering information in order to determine methods & sequences of operations needed to fabricate end product & determine product dimension & tolerances.
8. Select the appropriate tools, machines & materials to be used in the preparation of machinery works.
9. Observe & listen to operating machines or equipment in order to diagnose machine malfunction & determine need for adjustment or repair.
10. Clean & lubricate machines, tools & equipment in order to remove grease, rust, stains & foreign materials for safekeeping.

Qualifications, Skills and Experience:

1. High school or Vocational/Technical course in Machining; graduate would be an advantage
2. At least two (2) years work experience in machine works
3. NC II certificate from TESDA an advantage.

1. Conduct repair and maintenance of all tires, inner tubes and other tire accessories including rims.
2. Assemble and replace damaged tires due for relug or worn out tires.
3. Remove and install tires and inner tubes replacement.
4. Conduct inspection and check-up of loose wheel stud bolts and nuts and initiate appropriate action to be done.
5. Ensure wheel clocks are properly placed on the parked equipment before performing tire repair or replacement.
6. Perform inflation checks on all tires mounted to units and the standard air pressure required based on manufacturer’s recommendation.
7. Always clean rims, bead seat bands, flanges and o-ring grooves prior to tire mounting.
8. Perform proper matching of dual tires and rotate tires with uneven tread wear including alignment.
9. Check the condition and capacity of hydraulic jack to be used prior to performing the tire repair including the appropriate tools, air compressor, and power utility.

Qualifications, Skills and Experience:

1. High School or Vocational/Trade school graduate would be an advantage
2. At least one (1) year of related experience in heavy equipment tire repairs.
3. Can operate tire handler or forklift desirable

1. Perform major and minor repairs, PMS schedules and systematic trouble shooting of equipment undergoing shooting of equipment undergoing preventive maintenance.
2. Perform overhauls of major components.
3. Conduct systematic trouble shooting of major components.
4. Lead most of major repairs on site as the need arises depending on the given instructions by Lead Mechanic.
5. Conduct minor electrical failures i.e. replacement of bulb/fuses, welding jobs and minor air conditioning system trouble.

Qualifications, Skills and Experience:

1. Vocational course graduate
2. At least three (3) years’ work experience in heavy equipment.

1. Conduct trouble shooting and repair of airconditioning system of heavy equipment, support equipment, trucks, light vehicles as instructed by the immediate superior in coordination with the H.E. Coordinator.
2. Ensure that all airconditioning units installed are properly maintained and in good working conditions.
3. Attend to workshop and field services call immediately whenever airconditioning unit is out of service as relayed by operators and drivers.
4. Identify and request parts and materials needed to replace defective airconditioning parts in coordination with the Maintenance Planner.
5. Assist the Auto Electrician in the electrical minor repair and troubleshooting as required.
6. Conduct charging of appropriate environment friendly Freon required for the airconditioning unit.
7. Understand and trouble shoot the problem of airconditioning system and cycle of automotive and heavy equipment installation such as compressor, evaporator, condenser etc.

Qualifications, Skills and Experience:

1. High school or Vocational/Technical course in automotive air conditioning graduate would be an advantage; Graduate preferably vocational graduate in Auto Electrician or Industrial Electrician.
2. At least one (1) year related working experience in heavy equipment, trucking or automotive industry
3. NC II certificate in auto airconditioning desirable.